G312拓宽改建路基拼接技术及效果评价

G312沪宁段拓宽改建路基拼接技术,对不同地质条件、填土高度等分别采用超挖换填和粉喷桩加固。通过对典型路段地表沉降以及深部侧向位移观测资料的统计分析,表明效果显著,满足了路基拼接控制标准和设计要求。     

我国第三方物流的现状及发展思路

1我国第三方物流的现状20世纪90年代中期,第三方物流的概念开始传到我国。近几年,随着市场经济体制的完善和企业改革的深入,特别是随着外资企业的进入和市场竞争的加剧,企业对物流重要性的认识逐渐深化,对专业化、多功能的第三方物流需求日渐增加。 我国第三方物流企业从形成途径看,大体有4种类型:第一种是传统仓储、运输企业经过改造转型而来的,它占据较大市场份额。如中远国     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

现代有轨电车系统票务方案初探

现代城市建设迫切需要建立一个多层次、立体化的综合公共交通体系，重点是发展以轨道交通为骨干的公共交通网络：根据各城市的发展实际需要，进行合理规划、科学分析论证，从而建立大、中、低客运量相互匹配的多种形式相结合的客运交通工具。现代有轨电车系统是我国城市轨道交通体系中的崭新模式．具有优越的性能和良好的发展前景。现对现代有轨电车系统的适用性及与其适用的票制、售检票方式等进行研究和探讨。     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

FRP正弦波形夹心桥面板的等效有限元模型

以FRP正弦波形夹心桥面板作为研究对象,得到等效正交各项异性实心板,通过理论分析和数值对比,证明了方法的可行性;采用该法对一实际的FRP正弦波形夹心板桥进行了模态分析。     

新建铁路开通80 km/h后轨道状态变化规律初探

京九铁路龙川—东莞东段增建第二线工程,一次开通80 km/h后对线路轨道路基的沉降规律、静动态几何尺寸变化规律进行观测,分析新建普速铁路开通80 km/h的轨道变化规律,为类似工程提供经验借鉴。     

鱼雷航速航程与动力电池功率容量的关系

本文讨论电动鱼雷主要性能参数与其动力电池参数之间的关系。提出了综合功率系数概念及计算方法。综合功率系数愈小，推进系统的整体性能愈好。提高功率密度特别是提高体积功率密度对于减小综合功率系数非常重要。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)